When that motor vehicle is a 25-ton semi-truck, that risk becomes amplified. Drivers need all the help they can get when out on the road in these conditions. That’s where snow chains come in. Snow chains have been used for over 100 years to help drivers of all vehicle types gain traction and avoid wheel spin on snowy and icy roads.
Here’s a step by step guide on how to chain up your semi-truck tires for the snowy months ahead.
Step 1: Lay Down Chains and Inspect
Lay your chains out flat on the ground and look them over for any damage or twists knots that you’ll need to undo. Once you’ve ensured they’re in good working order, check that the chain hooks are facing up as well. This will be important later.
Step 2: Attach Chains
Place the chains over the top of your tire. They should hang or drape down over each side. Make sure they’re evenly distributed on both sides with the hooks facing out, away from the tire. Next, you’ll need to physically attach the chains to each other.
For this part, it’s always best to do the inside of the tire first. This can be difficult given that you’ll need to get under your truck, so some drivers prefer to use a tool like a rod as opposed to their hands.
Step 3: Tighten Links and Cams
Now that the chains are attached to the tire, they’ll need to be tightened. By hand, connect the chain to the closest possible link. You’ll want to pull in the most slack that you can manage. After you’ve done this, you’ll want to use your adjusting wrench to physically turn the cams on the chain.
This will tighten the chains even more. It’s ok if you’re not able to give each cam a full turn, you may only be able to get one or two of them to one full turn, but that’s fine.
Step 4: The Extra Mile
To make your semi-truck tires even more secure, add bungee cords across the chains. The bungees will attach from one end of the chains to the other. Three or four bungees will do the trick.
The key here is when attaching the bungees, make sure the hook is facing away from the tire. You don’t want it rubbing up against the tire, causing damage to the outside wall of the tire. Also make sure not to attach the bungee cords directly to the cams.
As a truck driver, taking your rig out in snowy and icy conditions is never ideal. If you do have to go out in the elements, safety is key. While it’s a big one, chaining up your semi-truck tires is only one part of winter driving safety. There’s a number of other ways to make sure you’re doing everything you can to stay safe in difficult conditions.